Yamaha Kodiak 400 4×4 Carburetor: A 1996 Yamaha Kodiak 400 4×4 Carburetor Is A Great Addition To Your ATV. It Provides Outstanding Performance And Is Extremely Durable. With Its Simple Design, It Is Easy To Install And Maintain.

The 1996 Yamaha Kodiak 400 4×4 carburetor is a four-stroke, single-cylinder, air-cooled ATV with a hydrostatic transmission. It has a steering assist feature and a lockable front differential. The carburetor models were discontinued in 1999, however, the Kodiak 400 was produced until 2006.

Comparison Chart For 1996 Yamaha Kodiak 400 4×4 Carburetor

1996 Yamaha Kodiak 400 4×4 Carburetor Recommendations

New Carburetor Fits 1993-1998 Yamaha Kodiak 400 Carburetor YFM 400 4×4 Carb ATV YFM400

New Carburetor Fits 1993-1998 Yamaha Kodiak 400 Carburetor YFM 400 4x4 Carb ATV YFM400

Check Price On Amazon

Your Yamaha Kodiak 400 carburetor is an essential component of your ATV, and it needs to be in good working order for your four-wheeler to run properly. If your carburetor is worn out, or if it’s not been maintained properly, it can cause all sorts of problems with your ATV. That’s why it’s important to find a quality replacement carburetor that will fit your Yamaha Kodiak 400.

The good news is that we have just the carburetor you need. Our new aftermarket carburetor is a perfect fit for Yamaha Kodiak 400 ATVs. It’s brand new, so you know it will work properly and it comes with all the necessary hardware for installation. Plus, it’s easy to install, so you won’t have any trouble getting it up and running.

Order your new Yamaha Kodiak 400 carburetor from us today and get back on the trail in no time!

Common Questions on New Carburetor Fits 1993-1998 Yamaha Kodiak 400 Carburetor YFM 400 4×4 Carb ATV YFM400

• What is the name of the part?

Carburetor

• What does it do?
It helps mix the air and fuel together before it goes into the engine.

• Where is it located?
On the engine, typically near where the air filter is located.

• What are some signs that it may need to be replaced?
The engine may run Rough, The Check Engine Light may come on, or there may be a decrease in fuel efficiency.

Why We Like This

• New aftermarket part (not rebuilt/refurbished/repurposed)
• Fits Yamaha Kodiak 400 YFM 400 4×4 4WD Carb ATV YFM400 1993 1994 1995 1996 1997 1998
• Brand new and high quality
• Easy installation, no installation instruction needed
• Package includes: 1x Carburetor, 1x O Ring, 1x Throttle Base Cover, 1x Throttle Cable Clip, 2x Mounting Nuts, 6x Base Cover Screw

Caltric compatible with Carburetor Yamaha Kodiak 400 Yfm400 Yfm-400 4Wd 1996-1998

Caltric compatible with Carburetor Yamaha Kodiak 400 Yfm400 Yfm-400 4Wd 1996-1998

Check Price On Amazon

The Carburetor is responsible for providing the engine with the correct mixture of fuel and air. It is a vital component of the internal combustion engine, and needs to be in good working order for the engine to run properly. In order to keep your engine running smoothly, it is important to regularly clean and maintain your carburetor.

This Carburetor is compatible with Yamaha Kodiak 400 YFM400 4WD models from 1996-1998. It is a direct replacement for Yamaha part numbers 3GD-14101-00-00, 4SH-14101-00-00, and 4SH-14101-10-00. The inside diameter of the manifold intake is 358 mm / 140 inches, and the external diameter of the air intake is 503 mm / 198 inches.

When replacing your carburetor, we strongly suggest comparing the posted picture to the unit(s) that need to be replaced. This will ensure that you are ordering the correct part.

Common Questions on Caltric compatible with Carburetor Yamaha Kodiak 400 Yfm400 Yfm-400 4Wd 1996-1998

• What is the carburetor float height on a 1996 Yamaha Kodiak 400?
The carburetor float height on a 1996 Yamaha Kodiak 400 is 1 3/16”.

• What is the main jet size on a 1997 Yamaha Kodiak 400?
The main jet size on a 1997 Yamaha Kodiak 400 is a #200.

• What are the air screw settings for a 1998 Yamaha Kodiak 400?
The air screw settings for a 1998 Yamaha Kodiak 400 are 1 1/2 turns out.

Why We Like This

• 1. Part Numbers: 3GD 14101 00 00 / 4SH 14101 00 00 / 4SH 14101 10 00
• 2. Compatible with Yamaha Kodiak 400 YFM400 4WD 1996 1998
• 3. Inside Diameter of Manifold Intake: 358 mm / 140 inch
• 4. External Diameter of Air Intake: 503 mm / 198 inch
• 5. We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced

Carburetor Carb for ATV Yamaha 1987-1990 & 1992-1995 Moto-4 350 YFM350 – 1987-2004 Warrior 350 YFM350 – 1987-1998 Big Bear 350 YFM350 – 1996-1998 Kodiak 400 YFM400 – 1995 Wolverine 350 YFM35F

Carburetor Carb for ATV Yamaha 1987-1990 & 1992-1995 Moto-4 350 YFM350 | 1987-2004 Warrior 350 YFM350 | 1987-1998 Big Bear 350 YFM350 | 1996-1998 Kodiak 400 YFM400 | 1995 Wolverine 350 YFM35F

Check Price On Amazon

Yamaha ATV’s are known for their reliability and performance, and the carburetor is a key part of that. The carburetor Carb for ATV Yamaha 1987-1990 & 1992-1995 Moto-4 350 YFM350 – 1987-2004 Warrior 350 YFM350 – 1987-1998 Big Bear 350 YFM350 – 1996-1998 Kodiak 400 YFM400 – 1995 Wolverine 350 YFM35F is a great replacement for a worn or damaged carburetor. This carburetor is manufactured to the highest production standards, meaning it is good at mixing fuel and air and keeping your engine running smoothly. It is also a durable and reliable carburetor that will give your ATV new power and torque.

Common Questions on Carburetor Carb for ATV Yamaha 1987-1990 & 1992-1995 Moto-4 350 YFM350 – 1987-2004 Warrior 350 YFM350 – 1987-1998 Big Bear 350 YFM350 – 1996-1998 Kodiak 400 YFM400 – 1995 Wolverine 350 YFM35F

• What is the part number for the carburetor Carb for ATV Yamaha 1987-1990 & 1992-1995 Moto-4 350 YFM350?

The part number for the carburetor Carb for ATV Yamaha 1987-1990 & 1992-1995 Moto-4 350 YFM350 is 5HN-14901-10-00.

•What is the carburetor Carb for ATV Yamaha 1987-1990 & 1992-1995 Moto-4 350 YFM350 made of?

The carburetor Carb for ATV Yamaha 1987-1990 & 1992-1995 Moto-4 350 YFM350 is made of high quality materials that are durable and long lasting.

•How does the carburetor Carb for ATV Yamaha 1987-1990 & 1992-1995 Moto-4 350 YFM350 work?

The carburetor Carb for ATV Yamaha 1987-1990 & 1992-1995 Moto-4 350 YFM350 allows air and fuel to mix together before entering the engine. This mix is then ignited by the spark plugs to create power.

•What are the dimensions of the carburetor Carb for ATV Yamaha 1987-1990 & 1992-1995 Moto-4

Why We Like This

• 1. Reliable and durable carb to help deliver optimum engines performance
• 2. Prevents engine from lacking of oil or spilling
• 3. Fits Yamaha Moto 4 350 YFM350, Warrior 350 YFM350, Big Bear 350 YFM350, Kodiak 400 YFM400, and Wolverine 350 YFM35F
• 4. 12 month warranty
• 5. Easy to install

Additional Product Information

Height 6.4 Inches
Length 6.9 Inches

Carburetor Intake Joint Boot Fit For 1993 1994 1995 1996 Yamaha Kodiak 4×4 400 ATV 3HN-13586-00-00

Carburetor Intake Joint Boot Fit For 1993 1994 1995 1996 Yamaha Kodiak 4x4 400 ATV 3HN-13586-00-00

Check Price On Amazon

A carburetor intake joint boot is a crucial component of your ATV, and it’s important to make sure it’s in good working condition. If you’re replacing a dried out or cracked intake boot, you need to make sure you get one that will fit your machine properly and provide a good seal. This carburetor intake joint boot is a direct replacement for Yamaha Kodiak 400 4×4 models from 1993 to 1996. It’s made from quality materials and is 100% tested before shipping, so you can be confident it will do the job right. And unlike other brands, this one is reinforced with steel to ensure proper sealing. So if you need a new carburetor intake joint boot for your Yamaha Kodiak 400 4×4, this is the one to get.

Common Questions on Carburetor Intake Joint Boot Fit For 1993 1994 1995 1996 Yamaha Kodiak 4×4 400 ATV 3HN-13586-00-00

• What is the purpose of a carburetor intake joint boot?

A carburetor intake joint boot is a piece of rubber or silicone that fits over the carburetor intake to create a seal. This prevents air from entering the engine through the carburetor, which could cause the engine to run lean and potentially overheat.

Why We Like This

• Direct replacement for a proper fit and easy installation
• Quality materials used
• 100% tested before shipping
• Reinforced with steel to ensure proper seal
• Fits for 1993 1994 1995 1996 Yamaha Kodiak 400 4×4

Carburetor Repair Kit Carb Kit for 1996 1997 1998 fits Yamaha Kodiak 400 YFM400FW 4×4

Carburetor Repair Kit Carb Kit for 1996 1997 1998 fits Yamaha Kodiak 400 YFM400FW 4x4

Check Price On Amazon

Your carburetor is one of the most important parts of your vehicle, and a essential component of the engine. A carburetor repair kit carb kit can be a great way to make sure that your carburetor is running smoothly and efficiently. This particular carb kit is designed to fit 1996 1997 1998 Yamaha Kodiak 400 YFM400FW 4×4 models. It comes with all of the standard items needed to rebuild your carburetor, so you can rest assured that it will be back in tip-top shape in no time. Plus, at Race-Driven, we are all about quality, so you can trust that this kit is up to the task.

Common Questions on Carburetor Repair Kit Carb Kit for 1996 1997 1998 fits Yamaha Kodiak 400 YFM400FW 4×4

• What is a carburetor?

A carburetor is a device that regulates the air and fuel mixture that goes into the engine. It is typically located on top of the engine.

• Where is the carburetor located on a Yamaha Kodiak 400 YFM400FW 4×4?

The carburetor is located on top of the engine.

• What are the symptoms of a carburetor that needs to be repaired or replaced?

Symptoms of a carburetor that needs to be repaired or replaced can include the engine running rough, the engine stalling, and decreased fuel efficiency.

• Why might the carburetor need to be repaired or replaced?

The carburetor may need to be repaired or replaced due to a variety of reasons, such as a build-up of dirt and debris, a clogged fuel filter, or a faulty float.

• How do you clean a carburetor?

You can clean a carburetor by removing it from the engine and using a carburetor cleaning spray or dip.

Why We Like This

• 1. Comes with all standard items to rebuild your carburetor
• 2. OEM Replacement Carburetor Repair Kit
• 3. Fits 1996 1997 1998 Yamaha 400 Kodiak YFM400FW 4×4
• 4. Customer Driven – Quality Driven – Race Driven
• 5. Brand New

Additional Product Information

Height 1 Inches
Length 9 Inches
Weight 0.15 Pounds

Buying Guide for 1996 Yamaha Kodiak 400 4×4 Carburetor

The 1996 Yamaha Kodiak 400 4×4 carburetor is a great buy for anyone in the market for a powerful and reliable ATV. This all-terrain vehicle features a liquid-cooled, four-stroke engine that produces plenty of torque and power. It also has a durable chassis that can withstand a beating, making it ideal for off-road riding. The Kodiak 400 4×4 comes equipped with features that include full-time four-wheel drive, front and rear disc brakes, and an electronic speedometer.

Frequently Asked Question

How do I clean the carburetor on my 1996 Yamaha Kodiak 400 4×4?

Cleaning the carburetor on your 1996 Yamaha Kodiak 400 4×4 is a pretty simple process. First, you’ll need to remove the air filter housing and the carburetor bowl cover. Next, use a carburetor cleaner to clean out the bowl, jets, and passages. Finally, reassemble everything and you’re good to go!

What is the purpose of the carburetor on my 1996 Yamaha Kodiak 400 4×4?

The carburetor’s purpose is to mix the air and fuel together in the proper ratio for combustion.

How do I adjust the carburetor on my 1996 Yamaha Kodiak 400 4×4?

The carburetor on the 1996 Yamaha Kodiak 400 4×4 can be adjusted by turning the screws that are located on the side of the carburetor.

Why is my 1996 Yamaha Kodiak 400 4×4 idling high?

The most likely reason for a 1996 Yamaha Kodiak 400 4×4 to idle high is that the idle speed screw is turned out too far.

What are the symptoms of a dirty or failing carburetor on my 1996 Yamaha Kodiak 400 4×4?

If your 1996 Yamaha Kodiak 400 4×4 is having issues with its carburetor, you may notice any of the following symptoms: -Difficulty starting the engine, or the engine stalling soon after starting-Rough idling-Engine hesitating or stalling when accelerating-Decreased fuel efficiency-Black sooty deposits on or around the carburetor

Conclusion

The Yamaha Kodiak 400 4×4 is a great choice for anyone in the market for a new ATV. With its dependable engine and solid construction, the Kodiak 400 4×4 is built to last. Its four-wheel drive system guarantees that you’ll be able to take on any terrain, and its carburetor ensures that you’ll have plenty of power to get where you need to go. So if you’re looking for an ATV that can handle anything you throw at it, the Yamaha Kodiak 400 4×4 is the perfect choice.